How to build a PC

Computer is not luxury product any more in our current time. Everyone can buy and use it easily. And tendency of young people to make PC for their own computer more and more popular. Beacause when they make it by themselves they can buy and choose good component parts which is good for their PC. But how to build a PC? I used to build a PC, so with my experience I think it is not very difficult if you do some following below steps.

Before beginning, you have to prepare enough equipment. They include: motherboard, processor, ram, hard drive, video card, case, power supply, optical drive, mouse, keyboard, speakers. How to buy them? You can go to electrical shop to buy all of them. How about a process? You can go to internet shop and look for some websites about them. Asking friends some advices about it is also a good idea. For the first time, I met many difficulties, I don’t know where to start. Fortunately, I just found out a good website in which I was instructed carefully each step to make PC. Therefore, it just took me half a day to complete. It is really out of my expectation. Now, I am very proud of telling you how to assemble a PC quickly and without difficulties.

When everything is in order, we start to assemble. Rule of process is you have to assemble simple equip first and from inside to outside. First, adding processor and ram to motherboard. Be sure that processor come with its fan and align marked corners of processor and socket. Especially, installing ram with firm pressure in order to protect its function. Second, we will assemble power supply, cover plate, motherboard standoffs and wipes. Cover plate and spacers will come with the motherboard. You will hear a click when it in place. Be careful when installing the screws. Just remember that fan side face outside and wipe face inside and use screw to secure power supply. There have small four pin connector give power to CPU. Each connector will have obvious port. The last is inside case,you have to install hard drive and CD drive. You need to choose a suitable place to put hard drive on available case. Screwing two sides to secure hard drive with case. When installing hard disk, we use bracket which comes with screws. Then,sliding hard disk into appropriate slot,connecting power supply to the hard disk. Making sure that drive is aligned properly.

After finishing installment, you need to check again to confirm whether it work or not. First,you start-up PC by press on button. If the signal light is bright, and you hear the sound like “bip”, it prove that your PC can run well. Then, you should look inside the case to make clear that the fan of processor is spinning. Because only when it spin, it will help your prosessor to release the heat, it also mean that your processor can work well for along time. Next, checking connection between PC and monitor, if on the screen appear any data, this thing mean monitor and PC has connected. The last one is checking CD-Rom, you have to assure that it can work normally such as it can push the disk outside and contrast. Finally, covering the case and screwing carefully.

Nowadays, each student need to have a computer in order to serve for studying. Because with the help of technology, students can learn more information and learn it quickly. But not anyone can afford to buy it. So, installment a PC by ourself is not only a good solution but also a way to save money and make us have a lot of fun. Those above steps is very simple and useful. However, if you failed in the first time, just remembered “Beginning is the difficult” and “Never, never give up”.